LiveLIVE RATES
  • BRIDGE8.75%FROM
  • DSCR / RENTAL5.99%UP TO 80% LTV
  • FIX & FLIP8.75%FROM
  • NEW CONSTRUCTION8.75%NEW PROGRAM
  • MAX LTC90%
  • CLOSE IN5–7 Days
  • ★★★★★5.0GOOGLE
  • Get Your Rate →
← INSIGHTS

Fix and Flip Loan Costs: Fees, Points and Rates

Fix and flip loan costs explained line by line: points, fees, draw charges, title and interest, with a worked $300K example and 2026 market rate ranges.

Investor and contractor reviewing renovation plans in front of a single-story Florida house during a fix and flip project, representing fix and flip loan costs

Fix and flip loan costs add up to more than the interest rate on your term sheet. Points, flat fees, draw fees, title charges and the way interest is calculated all change what a deal really costs you. Investors who compare rates alone often pick the wrong loan.

This guide breaks down every line, then runs a $300K flip through the math with real numbers. All dollar figures in the worked example are illustrations, not RBI quotes. Your own costs depend on the deal, your experience and underwriting.

Key takeaways

  • The rate is one cost. Points, flat fees, draw fees, third-party reports and title charges often add up to more than a month or two of interest.
  • Market pricing for residential flip loans ran about 9% to 12% with 1 to 3 points in mid-2026 (Crestmont Capital, June 11, 2026).
  • Interest method matters. Interest charged only on funds actually disbursed costs less than interest on the full loan from day one.
  • On our $300K example, total lender and closing costs came to roughly $26,000 over six months, and about $45,000 of cash was needed up front.
  • Ask for a full fee sheet before you pick a lender, not only a rate quote.

What counts as fix and flip loan costs?

Fix and flip loan costs are everything you pay to borrow and close, apart from the purchase price and the rehab itself. They fall into three groups.

  1. Lender charges. Origination points, an underwriting or processing fee, and draw fees.
  2. Third-party charges. Appraisal, title and escrow, recording, legal and insurance.
  3. Carrying cost. Interest while you own the property, plus taxes, utilities and insurance.

Most investors focus on group three. Groups one and two are paid early, and they come out of your cash.

The cost sheet, line by line

Use this table as a template. Ask every lender to fill in the same lines.

Cost
What it is
How it is usually charged
Origination points
A percentage of the loan for making it
1 to 3 points in the market (1 point = 1% of the loan)
Underwriting or processing fee
Flat fee to review your file
Flat dollar amount
Draw fee
Charged each time rehab money is released after an inspection
Flat fee per draw
Appraisal
Valuation of the property, often "as-is" and "after-repair"
Several hundred dollars up to about $1,000
Title, escrow, recording
Lender's title policy, settlement and recording charges
Varies by state and price
Legal and document prep
Loan documents and entity review
Flat fee
State taxes on the note
In Florida, documentary stamp tax and intangible tax apply to the note
Percentage of the note; ask your title agent
Interest
The cost of the money while you hold it
Rate times balance times time
Insurance
Builder's risk or vacant-property cover, plus liability
Premium

Two items catch people out. Draw fees are small each, but a rehab with five draws pays five times. And the state taxes on a note can be a four-figure line in Florida, so ask your title agent for a number before closing, not at it.

Worked example: a $300K flip

Here is a typical flip, with illustrative assumptions only.

  • Purchase price: $220,000
  • Rehab budget: $80,000 (total project cost $300,000)
  • After-repair value (ARV): $400,000
  • Loan: $187,000 toward the purchase plus $80,000 of rehab funds released in draws, for $267,000 total
  • Assumed pricing: 11% interest, 2 points, six-month hold

These are example inputs. Your leverage and pricing depend on underwriting.

Line
Amount
Paid when
Origination, 2 points on $267,000
$5,340
At closing
Underwriting fee (assumed)
$1,500
At closing
Appraisal (assumed)
$750
At closing
Legal and documents (assumed)
$1,000
At closing
Title, escrow, recording (assumed 1% of price)
$2,200
At closing
State taxes on the note (assumed)
$1,500
At closing
Four draw fees at $250 (assumed)
$1,000
During rehab
Interest, 6 months, funds drawn over time
$12,852
Monthly or at payoff
Total lender and closing costs
$26,142

Cash needed up front: your $33,000 down payment on the purchase ($220,000 minus $187,000), plus about $12,290 of closing charges, so roughly $45,300 before the first draw.

Note the interest line. We assumed four $20,000 draws released at the start of months two through five, so the balance climbs from $187,000 to $267,000. Interest on the actual balance comes to $12,852. If the lender charged interest on the full $267,000 from day one, the same six months would cost $14,685. That is $1,833 more for the same loan. We cover this in depth in our guide to non-Dutch vs Dutch interest.

Does the deal still pay?

Sale price $400,000, minus project cost $300,000, minus loan costs $26,142, minus selling costs (assume 8% of ARV, $32,000), leaves about $41,900. That is a thin but real profit. Loan costs took a bite of roughly 26% out of the $100,000 spread before selling costs.

For context, ATTOM reported a typical flip gross profit of $60,526 and a 21.5% margin in Q2 2026, with the typical flip taking 161 days from purchase to resale (ATTOM Q2 2026 Home Flipping Report, October 1, 2026). Your example will sit above or below that, but it shows why trimming even $3,000 of avoidable cost matters.

What rates and points look like in 2026

Rates have not drifted down. The Federal Reserve held its target range at 3.75% to 4.00% on October 28, 2026, after a quarter-point hike in September (FOMC statement, October 28, 2026). Freddie Mac put the 30-year fixed mortgage average at 7.18% on November 5, 2026, up from 6.22% a year earlier.

Private flip loans price above conventional mortgages because they are short-term, faster and based on the deal. Crestmont Capital's June 11, 2026 survey of hard money pricing put residential fix and flip loans at roughly 9% to 12%, 1 to 3 points, and 70% to 75% of ARV, over 6 to 18 months. Those are lender-published market ranges, not a quote from us. Weaker credit or thin experience can push pricing higher.

At RBI, pricing depends on the deal, your track record and leverage. We publish no single "rate" because there isn't one. Get your terms and see your own numbers.

Five ways to lower your loan costs

  1. Pick non-Dutch interest. Pay interest only on funds disbursed.
  2. Ask about prepayment. A loan with no prepayment penalty lets you sell early without paying for months you did not use.
  3. Keep the schedule tight. Every extra month adds interest and carry. A realistic scope and a ready contractor beat a cheap but slow one.
  4. Compare total cost, not rate. A lower rate with higher points can cost more on a six-month hold.
  5. Show your track record. Experience can earn better pricing and leverage, subject to underwriting.

Checklist before you sign

  • Do I have the full fee sheet, with every line and amount?
  • Is interest charged on disbursed funds or on the full loan?
  • How many draws are planned, and what does each cost?
  • Who pays for the appraisal and the draw inspections, and when?
  • Is there a prepayment penalty or minimum interest period?
  • What happens if my rehab runs long?

Want the broader picture? Read our ultimate guide to fix and flip loans and our 10 most frequent questions about fix and flip loans.

FAQ

What is a typical origination fee on a fix and flip loan?

Market surveys put it at about 1 to 3 points, meaning 1% to 3% of the loan (Crestmont Capital, June 11, 2026). On a $267,000 loan, each point is $2,670. Experience and deal strength can move the number, and each lender sets its own.

Are fix and flip loan costs tax deductible?

Often they are treated as part of the cost of the project or the business, but treatment depends on your situation and entity. Talk to your CPA before you decide how to record them.

Do I pay interest on the whole loan from day one?

It depends on the lender. With Dutch interest you pay on the full amount from closing. With non-Dutch interest you pay only on money actually disbursed. Always ask which one is in your term sheet.

How much cash do I need to close a flip?

Plan for your down payment on the purchase plus closing charges. In our example that was about $45,300 on a $300,000 project, before draws and interest. Your number depends on leverage and fees.

Can I roll closing costs into the loan?

Sometimes, within the lender's leverage limits. Programs differ, and anything financed raises your interest cost. Ask your loan officer what can be included, subject to underwriting.

Get your terms

We are a direct lender using our own capital, and you work with a real loan officer from first quote to payoff. No call center, no guessing. Get your terms and see a full cost picture for your next flip, or learn more about our fix and flip loans. Have a question first? Check the RBI FAQs.

Sources

This is not an offer for extension of credit nor a commitment to lend. Programs, rates, terms and conditions are subject to change without notice. Certain restrictions may apply. All approvals are subject to underwriting guidelines. Not all applicants will qualify. Examples are illustrations only. RBI Private Lending LLC, NMLS #2609886. Business-purpose loans only.

Ready to see your options?

Explore RBI's lending programs and find financing built around your next deal.